The KNIPEX StepCut 95 12 160 is a compact cable shears designed to deliver clean and precise cuts in copper and aluminium cables. It is only 160 mm long, making it easy to handle even in tight workspaces.

The shears are equipped with a multi-component handle that provides a secure and comfortable grip during use. The special StepCut geometry means that the conductors are cut step by step, reducing the required force by up to 40% compared to conventional cable shears of the same size.

The tool can cut soft, multi-stranded copper and aluminium cables up to 15 mm in diameter (50 mm²) as well as solid cables up to 5 × 4 mm². The cutting edges are inductively hardened to approx. 56 HRC, ensuring long life and precision over time.

The KNIPEX StepCut is not suitable for steel wires or hard-drawn copper conductors, but is ideal for general installation and electrical work where clean cuts and ergonomics are important.

The Knipex 95 31 280 cable cutter was developed for cutting copper and aluminium cables, both single and multi-stranded. It is not suitable for steel wire, wire ropes, or conductors with very fine strands. The cutter features hardened precision-ground blades that ensure clean cuts without crushing the material.

The ratchet system allows one-handed operation of the tool, making work in confined spaces easier. The two-stage ratchet mechanism reduces the amount of force required and ensures a smooth and controlled cut. The compact design and low weight contribute to easy handling.

An integrated pinch protection system prevents crushing injuries, and the handle with a steel surface provides stable support during cutting. The cutter can be used for aluminium conductors up to 4 × 150 mm² sector cable and is supplied in a blister pack.

The Milwaukee Replacement Blade Cable Cutter UG M18HCC75 is a set of cable cutting blades designed for use with the underground cutters M18 HCC75 and HCC75R. The blade is manufactured to deliver precise cuts and maintain high cutting efficiency over time.

As an original Milwaukee accessory, it is designed to fit precisely into the tool’s mechanism, ensuring proper function and long service life. It is suitable for professional users who need to replace worn or damaged cutting blades on their cable cutter.

The product is supplied as a spare part and may vary in appearance depending on configuration and technical details. Accessories are only included if explicitly stated in the delivery contents.

The Teng Tools Cable Cutter 497 was designed for efficient cutting and stripping of cables. The cutter is equipped with stainless blades that ensure a clean and precise cut, while the integrated stripping blade allows the removal of insulation from wires without damaging the conductor.

The handles are made of nylon reinforced with 30% fibreglass, providing a good balance between strength and low weight. The ergonomic handle contributes to comfortable use, even during repeated cutting.

With a cutting capacity of up to 22 mm cable diameter and an overall length of 138 mm, the cutter is suitable for both professional electricians and DIY enthusiasts who want a precise and durable tool.

The KNIPEX 95 27 600 is a powerful cable shear designed for two-handed operation, providing the user with optimal control and cutting power when working with large cables. The shears are deeply insulated and VDE-tested, making them suitable for work under electrical conditions.

The tool is intended for cutting copper and aluminium cables, both single- and multi-stranded, but is not suitable for steel wire or steel ropes. The hardened precision-ground blades ensure clean cuts without crushing the material.

The design includes a knee-lever mechanism that provides good transmission ratios and reduces the required force when cutting. The pinch guard reduces the risk of hand injuries, and the adjustable screw joint allows the tool to be adjusted as needed.

The cutting head is bolted and replaceable, extending the tool’s service life. With a length of 600 mm and a weight of 2.26 kg, the shears are robust and suitable for demanding tasks.

The Knipex 95 31 250 is a cable cutter designed for cutting single and multi-stranded copper and aluminium cables. It is not suitable for steel wire, wire ropes, or very fine, ultra-flexible conductors.

The cutter is equipped with hardened precision-ground blades that ensure clean and smooth cuts without crushing the material. The ratchet system allows one-handed operation and significantly reduces the required effort.

A two-speed gear drive contributes to a light and controlled cut, while the low weight and compact design make the tool suitable for work in confined spaces.

A pinch guard prevents crushing injuries, and the handle with steel surface ensures stability during use. The cutter is supplied in a blister pack.

The Milwaukee Jaw + Blade Cable Cutter - ACSR is a spare part consisting of a reinforced jaw and a blade made of aluminium steel. It is designed for use with Milwaukee cable cutters and intended for cutting ACSR conductors (Aluminium Conductor Steel Reinforced).

The jaw and blade are supplied as a set, allowing the replacement of worn parts and thus extending the lifespan of the existing tool. The reinforced steel construction contributes to high strength and precision under load.

The product is suitable for professional users working with electrical installations, cable assembly, or maintenance of power networks where reliable and durable components are required.

The Teng Tools Cable Cutter MB444 200mm was designed for efficient cutting of copper and aluminium cables. It is equipped with a clamp lock that contributes to safe handling during use, and two cutting modes that allow the cut to be adjusted to the cable type.

The reversible handles offer additional flexibility, as the cutter can also be used for stripping cables. The one-handed operation makes the tool practical in situations where a quick and precise cut is required.

The arms of the cutter are plastic-coated to provide a better grip and increased comfort during prolonged use. With a length of 200 mm, it is easy to handle and suitable for both professionals and DIY enthusiasts.

The KNIPEX 95 36 250 is a cable shear designed for cutting copper and aluminium conductors, both single and multi-stranded. It is not suitable for steel wire or very fine, flexible conductors. The shears use a ratchet principle that allows cutting thick cables with minimal physical effort.

The hardened precision-ground blades ensure clean cuts without crushing the conductor. The two-stage ratchet mechanism enables smooth and controlled cutting motion, making the tool suitable for work in confined spaces.

The handles are insulated with multi-component material and VDE-approved, meaning they meet the requirements for live working. The pinch guard prevents accidental injuries during use.

With a length of 250 mm and a weight of 652 grams, the shears combine low weight with high strength. They are supplied in SB backing/blister packaging and have a black lacquered finish that protects against corrosion.

The Knipex 95 36 280 cable cutter was developed to cut both single- and multi-stranded copper and aluminium cables. It is not suitable for steel wire, wire ropes, or conductors with very fine strands, but delivers precise and clean cuts in the intended materials.

The cutter is equipped with hardened precision-ground blades that ensure smooth and controlled cutting without crushing the conductor. The ratchet principle allows one-handed operation, making work easier, especially in confined workspaces.

The two-speed ratchet mechanism provides high leverage, so minimal effort is required when cutting large cable cross-sections. The low weight and compact design contribute to good handling, while the pinch protection reduces the risk of injury during use.

The tool is VDE tested, meaning it has been tested for live working up to 1000 V, and it comes in a black lacquered finish with SB blister packaging.

The Milwaukee Replacement Blade Cable Cutter - ACSR is an original replacement blade designed for use with Milwaukee cable cutters. It is made from reinforced aluminium steel, providing a robust and durable construction that withstands the forces generated when cutting ACSR conductors and other hard cable types.

The blade is intended as a spare part, allowing the user to replace a worn or damaged blade without having to replace the entire tool. This makes it a practical and economical solution for professionals working with electrical installations and cable assembly.

As part of the Milwaukee accessory programme, the blade has been developed to maintain the original performance and precision of the tool. It fits the corresponding Milwaukee cable cutters and ensures a clean and efficient cut when the tool is used correctly.

The Teng Tools Cable Cutter 496 250mm is made with chrome-molybdenum steel blades, providing high strength and long life. The drop-forged construction contributes to the tool's robustness and precision during use.

The cutter is equipped with gearing that increases cutting capacity and makes it easier to cut cables with larger diameters. It can handle both copper and aluminium cables up to 12 mm in diameter.

The two-component handles provide a secure and comfortable grip, reducing fatigue during extended use. An integrated locking lever allows safe storage of the cutter when not in use.

With a length of 250 mm, this cable cutter is suitable for both precision work and more demanding tasks that require power and control.

The KNIPEX 95 16 165 SB is an insulated cable shear designed for cutting single and multi-stranded copper and aluminium cables. It is not suitable for steel wires or hard-drawn copper conductors, which emphasises its specialisation in softer cable materials.

The shears are equipped with hardened blades with precision grinding that ensure a smooth and clean cut without crushing the conductor. The ergonomic design with multi-component handle provides a secure grip and comfortable handling, even with repeated use.

An adjustable, self-locking screw joint contributes to stability and durability, while the pinch protection increases safety at work. The tool is VDE-certified and tested for electrical work, making it suitable for professional installations.

With a length of 165 mm and a chrome-plated surface, the shears are supplied in SB backing/blister packaging, making them practical for both workshop and field service use.

The Knipex 95 12 200 SB is a pair of cable shears designed for cutting copper and aluminium cables with high precision. The double cutting edge and special blade geometry ensure a clean cut without crushing the conductor.

The shears are not suitable for steel wires or hard-drawn copper conductors, but can handle multi-stranded cables up to 70 mm² or a diameter of 20 mm. The blades are hardened and precision-ground to ensure long service life and consistent performance.

By dividing the cutting process into a pre-cut and post-cut, the user can cut even thick cables with one hand. The good leverage and ergonomic design reduce the effort required during use.

An adjustable, self-locking screw joint ensures stability, while the pinch guard reduces the risk of hand injuries. The shears come in a SB blister pack and have a burnished surface that protects against corrosion.

The Milwaukee M18 HCC75-0C is a hydraulic cable cutter from the M18 FORCE LOGIC2 series, designed for fast and precise cable cutting. It is powered by a brushless POWERSTATE2 motor that offers high efficiency and long service life.

The tool can cut ACSR/ACSS cables in less than three seconds with a force of 77.8 kN and handles cables with a diameter of up to 44 mm. The 3402 rotatable head provides flexibility in tight work areas and ensures optimal positioning during use.

The integrated hydraulic pump delivers constant pressure for maximum productivity, while the Milwaukee2 ONE-KEY2 technology enables wireless data collection and tool usage tracking.

The model is supplied in a case without battery and charger, making it compatible with existing M18 battery systems.

The Teng Tools Cable Cutter MB444 with 160 mm length was designed to cut copper and aluminium cables with high precision. It is equipped with a clamp lock that contributes to safe handling during work.

The cutter features two cutting modes that allow the user to adjust the cut according to the cable type and thickness. The reversible handles also allow the tool to be used for stripping cables, increasing its versatility for installation work.

The plastic-coated arms provide a good grip and comfort during use, even during extended work. With a length of 160 mm, the cutter is easy to handle and suitable for both professionals and DIY enthusiasts who want a precise and robust tool.

The KNIPEX 95 21 165 is a cable shear designed for cutting copper and aluminium cables, both single- and multi-stranded. It delivers a clean and smooth cut without crushing the conductor, making it ideal for precision work in electrical installations.

The shears are equipped with hardened cutting edges with precision grinding, ensuring long service life and efficient cutting performance. They feature an opening spring integrated into the joint and protected against loss, as well as an adjustable, self-locking screw connection that provides stability during use.

The handles are coated with plastic to ensure a secure and comfortable grip, and the design includes pinch protection to prevent injury during work. The tool is burnished to protect it from corrosion and has an overall length of 165 mm.

The KNIPEX Cable Shears 95 21 165 are not suitable for steel wires or hard-drawn copper conductors but are ideal for standard installation cables and flexible wires.

The Knipex 95 12 165 is a cable shear designed for cutting single and multi-stranded copper and aluminium cables. It delivers a smooth and clean cut without crushing the conductor, making it ideal for precision work in electrical installations.

The shears are equipped with hardened precision-ground cutting edges that ensure long service life and efficient cutting performance. The burnished surface protects against corrosion, and the multi-component handle provides a secure and comfortable grip during use.

An adjustable, self-locking screw joint contributes to stability and precision, while the pinch guard increases safety during one-handed operation. The tool is not suitable for steel wires or hard-drawn copper conductors.

With a length of 165 mm and a cutting capacity of up to 50 mm² (or Ø 15 mm) for multi-stranded copper cables, this model is a compact and efficient choice for professional and demanding users.

The Milwaukee Jaw + Blade Cable Cutter M18HCC GW is a spare part and accessory set designed for use with the Milwaukee M18HCC cable cutter. The set consists of a jaw and a blade that together enable precise cutting of EHS wire and steel wire.

The components are manufactured to withstand high loads and ensure a clean and controlled cut, which is important for professional installation and assembly work. The combination of jaw and blade allows the tool's performance to be maintained over time, even with frequent use.

The product is supplied as a complete set with both jaw and blade, ready for installation on compatible Milwaukee M18HCC devices. It is intended for users who wish to replace worn parts or adapt the tool to specific material types.

The Teng Tools Cable Cutter MB444 with 250 mm length was designed for efficient cutting of copper and aluminium cables. It is equipped with a clamp lock that reduces the risk of cable damage during work and provides the user with better control when cutting.

The cutter features two cutting modes that allow adjustment of power and precision depending on the cable type. The reversible handles can also be used for stripping, making the tool multifunctional for installation work.

The plastic-coated arms ensure a good grip and increased comfort during use, while the compact length of 250 mm makes the cutter easy to handle in tight work areas.